Launch CReader V is a brand new diagnostic device built for vehicle owners, those who want to maintain own cars. Due to device is designed specially for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD it is very easy to use. CReader V can read and clear DTC codes (data trouble code), also it can read live data in 2 modes, and perform many special tests on vehicle diagnostic system. Supports three languages, these features make it operation easily for any technician or just a car owner. Online upgrading ensures device always will be up to date and can test new car models.

Features:

• Read Codes
• Erase Codes
• View Freeze Data
• Data Stream – Entire Data list or Custom Data list
• Special Tests – I/M Readiness, MIL Status, O2 Sensor Test, On-board monitor test, EVAP system test, Vehicle Info
• Code Lookup

Technical data:

• Display: Backlit, 160 x 160 pixels
• Operating Temperature: 0 to 60°C (32 to 140 F°)
• Storage Temperature: -20 to 70°C (-4 to 158 F°)
• Power: 8 to 18 Volts provided via DLC
• Unit Dimensions: 126 mm x 88 mm x 22 mm
• Test Cable length: 0.9m 

Launch CReader V is specially designed to work with all OBD 2 compliant vehicles, including those with CAN (Control Area Network). A small number of 1994 and 1995 model year gasoline vehicles are OBD 2 compliant. To verify if a 1994 or 1995 vehicle is OBD 2 compliant, check the Vehicle Emissions Control Information (VECI) Label which located under the hood or by the radiator of most of the vehicles. If the vehicle is OBD 2 compliant,the label will designate “OBD 2 Certified”. Additionally, government regulations mandate that all OBD 2 compliant vehicles must have a “common” 16 pin (sixteen pin Data Link Connector – DLC).

For your vehicle to be OBD 2 compliant it must have a 16-pin DLC ( Data Link Connector) and the Vehicle Emissions Control Information Label must state that the vehicle is OBD 2 compliant.