Renault-Dacia Explorer (version 1.5) allow you to add a blank key or key card for many of Renault and Dacia passenger  cars via OBD2 diagnostic socket. You even do not need any PIN code or PIN code calculator! Software will program keys or key cards automatically. Also, you can even change vehicles VIN number in UCH module (immobilizer), for example it is useful if your UCH module was previously used on another car.

Options:

• Very simple and user-friendly software interface
• You do not need any PIN codes or access to Renault.net
• You can program up to 4 blank keys/cards
• Automatic remote control unit programming
• You can change VIN if immobilizer module was used previously
• VIN checksum check
• Internet updateable
• 10 minutes delay was removed
• Some bugs were fixed

Supported models (Renault and Dacia):

• Clio II Ph2/3, 2002-2006
• Espace IV, 2003-2006
• Espace IV Ph2, 2006+
• Kangoo MUX Ph2, 2002-2007
• Laguna II, 2000-2005
• Laguna II Ph2, 2005-2007
• Logan, 2004-2008 – New!!!
• Logan Ph2, 2008+ – New!!!
• Master Ph2, 2002-2006
• Master Ph3, 2007+ – New!!!
• Megane II, 2003-2006
• Megane II Ph2, 2007+
• Sandero, 2008+ – New!!!
• Scenic II, 2003+
• Scenic II Ph2, 2007+
• Solenza, 2003-2005 – New!!!
• Trafic II, 2002-2006
• Trafic II Ph2, 2007+ – New!!!
• Twingo Ph2, 2002-2007 – New!!!
• Velsatis, 2002+
• Velsatis Ph2, 2006+