Adapters:

• ICOM A – OBD style diagnostic vehicle connector with communication protocols for MOST, K-CAN, D-CAN, KL15/30 detection, ignition failure status, battery status and TD signal for measurements.
• ICOM B – OBD style diagnostic vehicle connector with a high speed MOST extension for ICOM A. Uses USB connection to the ICOM A.
• ICOM C – Old style 20 pin diagnostic vehicle connector (in engine compartment) to OBD. Service interval reset and engine speed signal.

All BMW series can be processed with the ICOM-A, B and C-modules:

• ICOM A – vehicles with OBD capability (connect to ISIS/SSS/ISID with LAN or WAN)
• ICOM B – for programming with MOST port (connect to MOST in vehicle / to ICOM-A with USB system)
• ICOM C - older model series with diagnosis socket in engine compartment (OBD 2)

• Multi Diag Access (Pass-Thru Device) – ONLY 899 EUR with worldwide shipping!!!
• BMW ICOM – 4399 EUR
• ZEDBULL - 899 EUR
• Nissan Consult III – 1199 EUR
• Caterpillar Communication Adapter II – 1999 EUR
• MVP (Multi Vehicle Programmer) – 299 EUR
• VAG VAS 5054A – 249 EUR
• Star Diagnosis – 679 EUR
• MultiDiag Access II - 1799 EUR
• BMW Group Tester One (GT1) – 799 EUR
• BMW OPS (MOST, D-CAN) – 1099 EUR
• BMW OPPS (MOST, D-CAN, after E65) – 1199 EUR
• GM Tech-2 PRO – 1799 EUR
• DICE Volvo -  1199 EUR
• XPROG-M (4.2) – 299 EUR
• Peugeot Planet Interface – 299 EUR
• Renault CAN CLIP – 499 EUR
• MUT 3 – 1999 EUR
• SBB – 499 EUR

Construction Vehicle Interface supports a wide range of RP1210A compliant diagnostic PC applications. Below there is a list of the RP1210A-compliant applications with which the Construction Vehicle Interface has been qualified:

• Caterpillar Electronic Technician
• Cummins Insite
• Detroit Diesel Diagnostic Link (DDDL);
• Detroit Diesel DDEC Reports;
• International 3BX Master Diagnostics (MD32);
• International DLC Master Diagnostics (MD32);
• International DLC II Master Diagnostics (MD32);
• Allison DOC;
• Eaton ServiceRanger;
• Bendix ACom;
• Meritor WABCO Toolbox;
• FreightLiner ServiceLink.

Vehicle Protocols Supported:

J1708/J1587, J1939, CAN (125K, 250K, or 500K) (Dual CAN supported), J2284 CAN (125K, 250K, or 500K), ALDL Pass-through, ALDL 8192, ALDL 9600, OBDII, ISO 9141, ISO 14230 (KWP2000), J1850 (PWM, VPM, or Allison), J1708, IESCAN (required for Allison).

Construction Vehicle Interface kit:

• Construction Vehicle Interface device
• Adapter 10-99-0004
• Adapter cable 404009
• Adapter cable 405048
• Adapter cable 443013
• Adapter cable 506103
• USB Cable

Benefits and applications:

• ECU automatic and manual search
• Models archive, with information relative to ECU type, diagnostic type, diagnostic cable, position and
• connectors images
• ECU data display
• Current and memorized errors (DTC) reading
• Errors memory erasing
• Data display in real time – RPM, battery voltage, throttle angle, etc.
• Components activation and test – injectors, ignition coils, fuel pump, etc.
• Switching off of service pilot light
• Key encoding
• Immobilizer lock
• Injection adjustment – CO Trimmer
• TPS Zero setting – throttle valve position sensor
• Configuring of immobilizer/alarm
• Resetting of auto adaptive parameters
• Idling adjustment

Covered systems:

Injection – display codes, Injection – blinking codes, Serial injection, Immobilizer, Ignition, ABS, Service, Instrument panel, Body computer, Injection adjustment, Transmission.

Covered brands:

Aprilia, Benelli, Bimota, BMW, Cagiva, Derbi, Ducati, Gas Gas, Gilera, Harley Davidson, KVN Motor, Kymco, Laverda, Malaguti, Mondial, Moto Guzzi, Moto Morini, MV Agusta, Peugeot, Piaggio, Sherco, Suzuki, Triumph, Vespa, Voxan, Yamaha

Communication protocols:

• Keyword 2000
• ISO 9141-2
• SAE J1850 41.6 Kbps PWM
• SAE J1850 10.4 Kbps VPW
• CAN BUS
• Manufacturer specific protocols

You can buy three different CLAAS diagnostic software licenses for this CLAAS diagnostic adapter. Difference between licenses is a term of subscription – 1 year subscription, 3 year subscription and lifetime subscription.

Compatible with Lexion, Avero, Dominator, Tucano, Jaguar, Xerion, Quadrant, Rollant, Uniwrap, Variant, Scorpion, Cougar, Disco, Quantum, Corto, Volto, Liner and other combines, tractors, round balers, telehandlers, forage harvesters, square balers.

With CARPROG you can program Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic socket.

Supported cars:

• Volkswagen Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, PIN code read, EEPROM read/write;
• VolkswagenPassat B6  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, EEPROM read/write;
• Volkswagen Bora, Jetta  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, PIN code read, EEPROM read/write;
• Volkswagen Touran  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, PIN code read, EEPROM read/write;
• Volkswagen Caddy   from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, PIN code read, EEPROM read/write;
• Volkswagen Tiguan, Eos  from year 2008+: odometer correction, PIN code read, EEPROM read/write;
• Skoda Octavia  (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer correction, PIN code read, EEPROM read/write;

No need for any additional adapter. You just need to buy software for your CARPROG device and activate it by internet.

Vehicle Communication Module (VCM) unit is housed in a magnesium enclosure with a tough, protective, plastic cover. It has PCMCIA expansion slot which can be used for example for wireless LAN cards or memory expansion. Vehicle Communication Module (VCM) also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test.

Integrated Diagnostic Software (IDS) is the new generation diagnostic software tool. IDS integrates WDS software modified to run on allmost all laptops with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS.

Vehicle Communication Module (VCM) 16-pin DLC cable is used to connect the Vehicle Communication Module (VCM) to the vehicle. VCM connect to the laptop through the Ethernet-USB adapter cable (H406/H416).

VCM (Vehicle Communication Module) . This tool provides all link based functionality including: Data logger, Self test, Service Functions, Module Configuration and programming, etc.

Features:

• Read Codes
• Erase Codes
• View Freeze Data
• Data Stream – Entire Data list or Custom Data list
• Special Tests – I/M Readiness, MIL Status, O2 Sensor Test, On-board monitor test, EVAP system test, Vehicle Info
• Code Lookup

Technical data:

• Display: Backlit, 160 x 160 pixels
• Operating Temperature: 0 to 60°C (32 to 140 F°)
• Storage Temperature: -20 to 70°C (-4 to 158 F°)
• Power: 8 to 18 Volts provided via DLC
• Unit Dimensions: 126 mm x 88 mm x 22 mm
• Test Cable length: 0.9m 

Launch CReader V is specially designed to work with all OBD 2 compliant vehicles, including those with CAN (Control Area Network). A small number of 1994 and 1995 model year gasoline vehicles are OBD 2 compliant. To verify if a 1994 or 1995 vehicle is OBD 2 compliant, check the Vehicle Emissions Control Information (VECI) Label which located under the hood or by the radiator of most of the vehicles. If the vehicle is OBD 2 compliant,the label will designate “OBD 2 Certified”. Additionally, government regulations mandate that all OBD 2 compliant vehicles must have a “common” 16 pin (sixteen pin Data Link Connector – DLC).

For your vehicle to be OBD 2 compliant it must have a 16-pin DLC ( Data Link Connector) and the Vehicle Emissions Control Information Label must state that the vehicle is OBD 2 compliant.

List of VCI1 supported systems:

• APS – Air processing system;
• BWS – Body work system;
• BCS – Bus chassis system;
• EBS – Brake management system;
• EEC – Exhaust emission control system;
• EMS – Engine management system;
• COO – Coordinator;
• ICL – Instrument cluster;
• TCO – Tachograph system
• ATA, WTA, CTS and AUS – Auxiliary heater system, Clock timer system, Radio;
• OPC and RET – Gearbox management system;
• SMS – Suspension management system;
• RTI – Road traffic information;
• TPM – Tyre Pressure Monitoring;
• LDW – Lane Departure Warning;

Attention:

• Needs PC with RS232 (COM PORT) or USB->RS 232 converter.

Software: