We offer you a best diagnostic sollution for MAN trucks and other heavy vehicles with CAN communication system. Kit consists of Pass-Thru device, optional adapter for Pass-Thru device to support heavy vehicle diagnostic protocols, MAN diagnostic software and notebook for complete system.

Software screenshot:

If you’re not familiar with Pass-Thru device and MAN diagnostic software please CONTACT US for more information.

Now on stock:

• Mercedes-Benz Star Diagnosis
• MAN CATS II
• Scania VCI 2
• Volvo Interface 88890020
• Renault Diag NG3
• Iveco ELTRAC
• Scania VCI 1
• MAN with CAN diagnostics
• Caterpillar Communication Adapter II

DIAG NG3 kit:

• genuine diagnostic interface made by ACTIA, wireless connection to PC;
• OBD2 cable for new Renault trucks;
• 12 pin cable for old Renault trucks;
• Diag NG3 software loaded to notebook;

This kit will allow you to do all diagnostic and programming operations that is possible to any Renault dealer workshop.

Languages: english, spanish, portugese, france, german, dutsch , italian, czech , romania, greece, polish, norwegian, finland, russian, turkish

With NG3 multi gen software – you can easy generate codes for programming.

The wireless connection allows you to:

• Carry out Active Diagnosis by local checking the activation and the working of the components without the help of other operators.
• A better ergonomy during diagnosis operation without the hindrance and limitations of the cable.
• Check the parameters of the vehicle on-board systems.

IVECO (also Daewoo, TATA trucks, IRISBUS) diagnostic set includes:

• ECI diagnostic interface;
• 38 pin cable (Iveco 99331043 part number);
• 19 pin cable (Iveco 99368555 part number);
• OBD2 cable (Iveco 99331057 part number);
• 99327017 – adapter cable for connection 38pin, 19pin and OBD2 cables to ECI;
• 99327037 – SELF-DIAGNOSIS CONNECTOR;
• 99327018 – USB cable for PC connection (short);
• 99327019 – USB cable for PC connection (long);
• DVD with EASY installation and manual , can install on any laptop.

GUI Languages: Italian, Spanish, French, English, German, Czech, Danish, Hungarian, Dutch, Swedish, Finnish, Portuguese, Polish, Turkish, Croatian, Greek, Russian, Korean

With CARPROG AirBag tool you will receive all AirBag version software’s and adapters that will be available for sale at the moment of purchase.

• Universal Tool – CARPROG has powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility’s to make on the same hardware Microcontroller programmer, Immobiliser Transponder Key programmer with antenna adapter for 125/134 kHz, K-line diagnostic (dashboard odometer programming, immobilizer key programming), CAN line diagnostic, +5V/+12V  output, USB, power supply only from USB.
• Low Cost tool – with CARPROG basic you will receive many extra functions (like vehicle radio code calculator CC1, EEPROM programmer and VAG dashboard’s CAN programmer ) and all additional software you can buy extra according your needs.
• Hacker Safe tool – each CARPROG have individual serial number and for software activation it uses internet based server connection. Inside CARPROG there is a advanced crypto security system to prevent tool from cloning. Be sure that your investments in to CARPROG device will be safe.
• Easy Update by Internet System – you can buy any update Online on and in one day you will be able to use it with your CARPROG tool.
• User Friendly – Microsoft Windows XP software, works without any installations,  on all PC, use USB to link with your PC, all adapters schematics and diagrams are on-line;

• Universal Tool – CARPROG has powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility’s to make on the same hardware Microcontroller programmer, Immobiliser Transponder Key programmer with antenna adapter for 125/134 kHz, K-line diagnostic (dashboard odometer programming, immobilizer key programming), CAN line diagnostic, +5V/+12V  output, USB, power supply only from USB.
• Low Cost tool – with CARPROG basic you will receive many extra functions (like vehicle radio code calculator CC1, EEPROM programmer and VAG dashboard’s CAN programmer ) and all additional software you can buy extra according your needs.
• Hacker Safe tool – each CARPROG have individual serial number and for software activation it uses internet based server connection. Inside CARPROG there is a advanced crypto security system to prevent tool from cloning. Be sure that your investments in to CARPROG device will be safe.
• Easy Update by Internet System – you can buy any update Online on and in one day you will be able to use it with your CARPROG tool.
• User Friendly – Microsoft Windows XP software, works without any installations,  on all PC, use USB to link with your PC, all adapters schematics and diagrams are on-line;

With CARPROG FULL tool you will receive all Software’s and Adapters that will be available for sale at the moment of purchase.

Supported models:

• EDC16 1.7 CDTi
• EDC16 1.9 CDTi
• EDC16 2.0 CDTi
• Agilla read/write KM
• Corsa C read/write KM
• Astra ….2000 read/write KM
• Astra 2000…. read/write KM
• Vectra ….98 read/write KM
• Vectra 98…. read/write KM

Opel Bosch ME7.6.2 ECU’s : read/write KM

• TIGRA BZ14XEP 2005 – 2009
• ASTRA HZ14XEP 2004 – 2009 (Z12XEP 2006 – 2009, Z14XEL 2004 – 2009, Z20LER 2005 – 2009, Z20LEL 2004 – 2009, Z20LEH 2005 – 2009, Z16LET 2007 – 2009, CORSA DZ14XEP 2007 – 2009, Z12XEP 2007 – 2009
  Z10XEP 2007 – 2009, Z16LER 2007 – 2009)
• ZAFIRA B Z20LER 2005 – 2008 (Z20LEH 2006 – 2009)

Paid Functions:

• Write new KM in pump PSG16 – 250 eur
• Write new KM in pump CMD 12 – 250 eur

Operated models:

• OPEL – from 1994 till 2004 controllers HC05, HC11, HC08
• Audi,VW – VW2(6N0), VW3(1J0), VW5x, VW61, Bosch HC11K4, Bosch HC12, Bosch CR16
• Ford Focus (1998-2004): controllers on CR16 MFR PLCC44, HC12
• For -sensor in plastic box on 95C160
• Mitsubihi – Crash controllers
• Service of controllers EDC15 (reading PIN, km, writing new course/run, reading EEPROM)
• Corsa C-reading PIN, correction of dashboard
• Reading the code through diagnosis in Opel radio CDR500/2005 on TMS 370

Additional paid functions:

• Reading PIN from hybrid computers Delco Opel – 160eur
• Mercedes Crash -180 eur
• Honda Crash – 180 eur
• RENAULT BOSCH HC12B32, HC12D60 – 110 eur NEW

For more information please contact us.

Operating temperature: -40 to +85°C (-40 to +185°F).
Storage temperature: -40 to +125°C (-40 to 257°F).

Before the 88890020 communication unit can be used, a driver must be installed on the PC. In addition, a utility application (Admin0020) can be used to check the status of the device and update the firmware if and when needed.

There are three different ways, described below, of connecting communication unit88890020.

Via USB-cable

Connect the communication unit to the vehicle.
Connect the USB-cable between the communication unit and the PC.
Select communication unit 88890020 and USB-cable setting in window Alternative. 

Directly to the communication unit

Note: Your PC must have Wireless LAN 802.11b/g and support for 128 bit WEP (encryption), if it is to be used for direct communication with the communication unit. The Panasonic CF29 has this built into the motherboard. Additional Wireless LAN cards will be recommended in the future.

Connect the communication unit to the vehicle.
Select communication unit 88890020 and Direct to communication unit in window Alternative. 

Security level Directly to the communication unit

Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is generated automatically and is not seen during the configuration. 

Via an access point

Note: Contact the local IT-support or network technician before installation.

Connect the communication unit to the vehicle.
Select communication unit 88890020 and Via an access point in window Alternative. 

Security level Via an access point

There are three alternatives for this:

WEP and MAC-address. Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is written in during configuration. The MAC-address is to be written into the access point for additional security. WPA and PSK. Communication is performed via WPA, Wi-Fi Protected Access. 802.1x. Communication is performed using standard EAP_MSCHAP v2. The communication unit is then treated as a PC and will be logged on to the network using a username and password. 

Product description for communication unit 88890020

Communication unit 88890020 has a number of different coloured LEDs. These LEDs show the status of the communication unit and indicate warnings, etc. Refer to the table below for an overview.

General

• Light and compact diagnosis tools for vehicles, bus chassis and stationary engines with Trucknology technology
• Independent thanks to wireless communication between service computer and communication interface (range to 200 metres)
• Regular software updates via CD ROM and data transfer
• Software available in over 20 languages
• Support by MAN-cats user service hotline
• Connection for printer

Vehicle diagnosis

• Control unit identification
• Read out, evaluate and delete diagnostic memory
• Actuator test (active triggering of actuators)
• Monitoring (visualisation and evaluation of current sensor signals)
• General circuit diagrams of systems retrievable

Miscellaneous

• HD-OBD scantool (from approx. Mid-2004)
• Heavy Duty On Board Diagnosis, read-out of data relevant to exhaust gas

Optional

• Can be expanded with additional software modules