• Multi Diag Access (Pass-Thru Device) – ONLY 899 EUR with worldwide shipping!!!
• BMW ICOM – 4399 EUR
• ZEDBULL - 899 EUR
• Nissan Consult III – 1199 EUR
• Caterpillar Communication Adapter II – 1999 EUR
• MVP (Multi Vehicle Programmer) – 299 EUR
• VAG VAS 5054A – 249 EUR
• Star Diagnosis – 679 EUR
• MultiDiag Access II - 1799 EUR
• BMW Group Tester One (GT1) – 799 EUR
• BMW OPS (MOST, D-CAN) – 1099 EUR
• BMW OPPS (MOST, D-CAN, after E65) – 1199 EUR
• GM Tech-2 PRO – 1799 EUR
• DICE Volvo -  1199 EUR
• XPROG-M (4.2) – 299 EUR
• Peugeot Planet Interface – 299 EUR
• Renault CAN CLIP – 499 EUR
• MUT 3 – 1999 EUR
• SBB – 499 EUR

Available in: english and spanish languages.

Function:

Live data graphic display
Full component activation
Read & change ECU coding
Setting of adaptation values
All CANBUS function supported
Internet update function
HYUNDAI immobilizer
Testing report saving function
VOLKSWAGON immobilizer III
Coding of the new control modules
NISSAN idle speed self learning function
Multi-language for international market demand
Hand-held independent operation, supporting PC link

Specification:

CPU: SAMSUNG ARM 2410A, 200MHz
FLASH Card: SD Card, 512 MB RAM: 32M
Power Supply: 8-12V (DC)   110-250V 50Hz (AC)
Operation System: Window CE
Storage: -30 ~ +90 degree
Humidity: <90%
Working Temp.: -10 ~ +80 degree
Dimension (mm): L630XW200XH420
Gross Weight: 9.1 kg

• Audi A8 2007 SW C321 OBD2

New versions added:

• VW Crafter EZS 2009- 9S12XDP512
• Mercedes Sprinter EZS 2009- 9S12XDP512  

Read/Write eeprom possible:

• Mercedes W211 ZGW HC912DG128 Total KM OBD2
• Mercedes W211 ZGW HC9S12DT256 Total KM OBD2

Software for change KM:

• VW Multivan 2010 NEC + 24C32 OBD2
• Citroen C4 93C66 V2 (2009)
• Iveco Massif 24C02 2010
• Kia Sorento 2010 24C16
• Nissan Aprio 95040 TSSOP
• Nissan Note 93C76
• Opel MJD 603.S4 95320
• Opel GT BCM 95080
• Peugeot Expert 2010 BSI crypto 95128 New SW
• Pontiac G5 BCM 95080
• Pontiac G6 BCM 95080
• Pontiac HHR BCM 95080
• Pontiac Solstice BCM 95080
• Renault Megane III 2009- 24C16
• Renault Scenic III 2009- 24C16
• Yamaha TDM 850 93C46
• Range Rover Vogue 2010 24C16

Read/Write of eeprom possible! Don’t waste your time for soldering 14 wires to dash:

• Opel Movano NEC
• Renault Clio NEC
• Renault Megane NEC
• Renault Thalia NEC

Powergate has an internal memory which can contain the original ECU file and two different maps. In this way, the owner of the vehicle has always at his disposal two different developing steps of the map, to be uploaded on the vehicles ECU at any moment.

Updating protocols of communication has never been so easy. A connection to the internet and a few minutes are all it is required to gain the access to manufacturers data base for downloading everything is needed to make Powergate programmer operative on the largest number of vehicles as possible. This solution was studied for different operating situations, as it is suitable both to professional chip tuners who want to propose a product always up-to-date, than to users who make use of Powergate solely on their own cars. A very usefull device with first-class features.

Powergate is very easy to use. The device itself will guide you through the reading and writing of the ECU, with clear and detailed operation instructions. Another interesting innovation of Powergate is the option to quickly and easily check and erase DTC (Diagnostic Trouble Code) errors.

PWGpro is the software to manage your Powergate programmer, a simple interface that guides user from choosing the vehicle, to saving and uploading several ECu mapping files, ready to be written directly on the vehicle.

Supported vehicles and engines

Powergate software support list by vehicle make, model, engine and ECU: POWERGATE SUPPORT LIST

• ZGW (Central Gateway) - Odometer, EEPROM Read, EEPROM Write by OBDII
• KI (Instrument Cluster) - Odometer by OBDII
• EZS (Ignition) - Odometer by OBDII
• Assyst Plus – Read, Write full service history by OBDII
• Erase DTC’s (Diagnostic Trouble Codes) in the all car modules by OBDII

Software for change odometer in Renault LAGUNA III – programming odometer in:

• ABS ATE Controller (CDC/ADAM)
• Instrument Cluster

Software for change odometer in Renault MEGANE III – programming odometer in :

• ABS ATE Controller (CDC/ADAM)
• Instrument Cluster

Software for change odometer in VW Touran – programming milage via OBDII
Software for change odometer in Fiat Stilo MC912 programming milage via OBDII
Software for change odometer in Fiat Stilo MC9S12 programming milage via OBDII
Software for change odometer in FORD Ranger w. CAN – programming via OBDII – new software version
Software for change odometer in Hyundai i10 24C08 – programming milage
Software for change odometer in Landrover Rangerover LR4 2010 24C16 – programming milage
Software for change odometer in Landrover Discovery LR4 2010 24C16 – programming milage
Software for change odometer in Nissan Aprio 2010 – programming milage

• Compact main unit —Standard equipment for technicians
• The only diagnostic tool which can work on two vehicles at the same time
• Bluetooth technology, wireless communication. 100 m bluetooth communication
• Cable communication support
• Universal 16 PIN connector
• Fully inherited diagnostic functions from X-431
• Capable of nearly all domestic vehicle makes and Asian, European, American vehicle makes
• Greatly improved program running speed
• More convenient software update
• 4,3 inch high luminance, high resolution color touch screen
• 1530mAh Rechargeable battery
• 1GB memory card
• Standard USB printer connector, external printer support
• Full after sales service system, life time 1 to 1 service

X-431 DIAGUN enables you to:

• reading and erasing stored trouble codes (DTC)
• display of error codes as code number and description
• display live data streams and customized data lists
• delete auto-adaptive values (engine or automatic transmission) 
• basic settings (TPS throttle, ESP, transmission)
• coding and Programming (Depending on manufacturer) 
• service interval reset (long life service, particle filter maintenance)
• calibration (injector calibration FORD, Renault, MAZDA)
• reset language of instrument cluster
• maintenance support: reset of parking brakes (SBC, EPB), ABS bleeding
• engine management EDI (diesel injection)
• engine management petrol
• reading and erasing fault codes (DTC)
• airbag systems
• automatic transmission
• remove adaptation values
• live engine data (customizable)
• diplay trouble codes including code description
• ABS,ESP,SRS
• automatic gearbox (remove adaptive values)
• CAN-BUS systems (different CAN BUS variations)
• body computer
• diesel particle filter (DPF)
• door and seat modules
• quick test
• instrument cluster
• service interval reset
• multimedia options
• many more…

* also available with Russian interface language!

Ideal for the independent garage wanting a multi-make diagnostic tool giving in-depth diagnostics on a wide range of European-manufactured cars. You have already a PC or a laptop PC running Windows XP, Multi Diag Access is the software solution which allows you to run it as a diagnostic and repair station.

Features:

• Fully compliant SAE J2534 & J2534-1
• Either RS 232 or USB interfaces PC
• K-Line IS9141 (100 mA)
• KWP 2000 IS14230-4
• SAE J1850 PWM
• SAE J1850 VPW
• CAN 2.0 B IS11898
• CAN IS15765-4
• SCI SAE J2610
• On-board memory

Multi Diag Access is a software on CD ROM and Vehicle Communication Interface. You can use it in all maintenance and repairs jobs for all major car brands, More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions!

Multi Diag Access is simple, user friendly and very fast. Diagnostic, Maintenance and repair operations in just a few clicks without being an electronic expert!

Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

• Maintenance: Diagnosis codes from all computers, Reset maintenance interval, Modification of the sewage, Read / erase fault calculators, Maintenance of the particulate filter.
• Air Conditioning: Diagnosis of cooling electronic, Reading settings cooling circuit, Test servactuators
• Pollution control: Diagnosis of the particulate filter, Electronic control of pollutant emissions, Control of the Lambda probe.
• Wheels:  Electronic configuration of the size of tires, Electronic configuration of tires (winter / summer), Setting valves tire pressure, Diagnosis and management of shock-driven, Calibration of the sensor angle Driving (initialization of the steering angle).
• Body: Implementation of safety airbags (lock / unlock), Reconfiguration of a new calculator Airbag, Diagnosis of calculators Airbag, Rain sensor windshield (reading and erasing fault), Test panel and activators of lights, Setting Xenon headlights, Rear radar.
• Post-Equipment: Setting up the radio, Configuration loader CD, Setting alarms, Configuration of the coupler, Configuration bicycle loading system.
• Braking: Diagnosis of calculators ABS, ESP, Diagnosis and unlock electric brakes, Flush the brake system
• Motor: Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..), Programming of injectors, Electronic configuration of the EGR valve, 
• Expert Mode: Diagnosis of advanced computers, Configuration of comfort functions, Change the language of the instrument panel, physical measures (option with a probe – not supplied), Direct access tall functions of diagnosis.

Set includes:

• VCI (Vehicle Communication Interface)
• DB25 OBD-2 Male cable
• OBD2 Male OBD2 Female cable
• DIN6 USB cable
• DIN6 DB9F cable
• Carrying case
• Software supports the following languages: Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

Now on stock:

• Mercedes-Benz Star Diagnosis
• MAN CATS II
• Scania VCI 2
• Volvo Interface 88890020
• Renault Diag NG3
• Iveco ELTRAC
• Scania VCI 1
• MAN with CAN diagnostics
• Caterpillar Communication Adapter II

DIAG NG3 kit:

• genuine diagnostic interface made by ACTIA, wireless connection to PC;
• OBD2 cable for new Renault trucks;
• 12 pin cable for old Renault trucks;
• Diag NG3 software loaded to notebook;

This kit will allow you to do all diagnostic and programming operations that is possible to any Renault dealer workshop.

Languages: english, spanish, portugese, france, german, dutsch , italian, czech , romania, greece, polish, norwegian, finland, russian, turkish

With NG3 multi gen software – you can easy generate codes for programming.