NOx Sensor Emulator DAF EURO 5 is a brand new product that complements our emulator products range. As usual, we are trying our best and this device also designed, developed and manufactured in the European Union. It is assembled from the highest quality components to minimise any fault caused by ambient temperature fluctuations and heat from the exhaust pipes since this emulator must be installed in the original NOx sensor module box.
NOx Sensor Emulator DAF EURO 5 details
First things first, this device emulates both (two) NOx sensors (upstream and downstream), so it covers NOx emissions control completely. It means that the emulator will provide necessary data to the ECU needed for proper work of engine even if the catalytic converter is damaged or removed. No more OBD (On-Board Diagnostics) DTC (Diagnostic Trouble Code) errors, no engine limp mode activations or rough run. The engine will work smoothly with normal fuel consumption level. Installation is easy and doesn’t require special knowledge or equipment. We will provide installation manuals and twelve-month warranty. Continue reading NOx Sensor Emulator for DAF EURO 5 vehicles is now available
AdBlue Emulator V5 is now again on stock and we can offer it in large quantities. All large pre-orders will be shipped within two business days and there will be no shipping delay for all new orders. All kits of AdBlue Emulator V5 available (10, 20, 50 and 100 units per kit). Just to remind you, this emulator is designed for EURO 5 vehicles made by DAF, Iveco, MAN, Mercedes-Benz, Renault, Volvo and FORD.
- SCR Emulator V4 NOx emulates SCR system completely;
- Emulates DEF fluid level sensor;
- Emulates DEF fluid temperature sensor;
- Emulates NOX sensor;
- Emulates exhaust temperature sensor;
- Emulates NOX sensor;
- There will be no engine power loss;
- No diagnostic errors at all on SCR module;
- User friendly (easy to install and uninstall);
- Saves your money, equipment and time;
Continue reading AdBlue Emulator V5 again on stock and available in all kits
Free EURO 6 DTC Error Code Eraser! You think it’s impossible? No, it’s possible, and we offer one free EURO 6 DTC Error Code Eraser device for orders with ten or more EURO 6 AdBlue Emulator units.
How it works. We will give you one eraser device of the particular type for free if you order ten or more EURO 6 AdBlue Emulator modules at once. It means that if you order for example ten EURO 6 AdBlue Emulator modules for Volvo we will add a free EURO 6 DTC Error Code Eraser compatible with Volvo EURO 6 vehicles.
It’s a time-limited offer so don’t miss your chance. It’s a great device, and it is convenient when you need to install the EURO 6 AdBlue Emulator. It will erase all DTC error codes from the OBD system. There is no need for any expensive equipment like the diagnostic scanner with a PC or specialised knowledge. Just plug this eraser to the OBD socket, wait for a few seconds. That’s it.
Now we can offer EURO 6 DTC Error Code Eraser modules for trucks and other heavy vehicles made by DAF, MAN, Iveco, Mercedes-Benz, Renault, Volvo and Scania. We also offer EURO 6 emulators for trucks and heavy vehicles of these manufacturers. Continue reading Free EURO 6 DTC Error Code Eraser – get yours now!
SCR Emulator V5 product line stock restored and we are glad to say that we will ship all orders without any delay. All pre-orders already shipped. Large kits of ten, twenty, fifty and one hundred V5 emulator units also available. We want to remind you that all our emulators developed and manufactured in Europe. Also, we provide next day delivery to the European Union countries and slightly longer worldwide shipping (shipping delivery time depends on how distant your shipping address is from the major cities in your country).
SCR Emulator V5 modules are compatible with EURO 5 trucks made by DAF, MAN, Iveco, FORD, Mercedes-Benz, Renault, Volvo, and Scania. Capable of overriding whole SCR system and NOx sensor. Easy to install, doesn’t require additional programming (if pre-programmed to the truck type that you need). All installation instructions and other documentation available on our website. If you need more information about this product then, please contact us directly. Continue reading SCR Emulator V5 again on stock!
AdBlue Emulator product line is our bestseller, but we noticed that quite a lot of customers just ignores our recommendations. In the past few months, we received a substantial amount of burned devices for repair and several flooded units. In response to this situation and to protect our customers who follow the installation instructions we have decided to change the terms of the warranty.
The most popular AdBlue Emulator product line products like V4 and V5 shipped with stickers. These labels indicate the state of the program, precisely which program is active and for what brand of the truck emulator is prepared. Also, there is a name of the device, pinout explanation, and the most important thing is the warning related to installation process – “Attention! Connect ground cable (brown) first!”.
AdBlue Emulator V4 and V5 connection
Why it’s so important? That’s because emulators are sensitive electronic devices. They designed in that way so they can’t do any damage to your truck, but they are vulnerable. By failing to follow the installation instructions you can burn the emulator. And the most dangerous what you can do is to ignore the main rule, to connect ground wire first.
To be more accurate, we can identify which emulator burned due to the incorrect installation procedure. You must keep in mind that brown wire must be connected first even when you’re connecting it to the V4 emulator programmer (V4 emulators).
Warranty terms changed
So from now, we started to ship all AdBlue Emulator V4 and V5 units with an additional red label to pay your attention to the importance of the ground wire connection. It must be connected firmly, and you must connect the ground wire first when installing the emulator and disconnect it last when you need to disconnect the emulator.
We will not accept burned emulators for warranty service. Also, we need to remind you to put emulators in the dry area on the truck when installing. Flooded devices also lose their warranty. We do not cover back shipping costs for devices sent to us and not accepted by our warranty service specialists.
All necessary AdBlue Emulator installation instructions are available on our website. For more information, please contact us.
AdBlue Emulator price for bulk kits reduced. Now all bulk kits of emulators available for a smaller price. Just to remind you, we have a ten, twenty and fifty unit bulk kits. Every type of kit has three different options. They are available as kits of V5, V4, and V4 (with Volvo plug) emulators. We offer only one type of emulators per kit and it’s not possible to mix up emulator types in one kit.
AdBlue Emulator types
- AdBlue Emulator V5 – this emulator is compatible with trucks and buses made by DAF, FORD, Iveco, MAN, Mercedes-Benz (only a few models, please contact for more information), Renault, Scania and Volvo.
- AdBlue Emulator V4 – this emulator supports trucks and buses made by DAF (it also support DAF LF series with Grundfos SCR system), MAN, Iveco, Renault, Scania and Volvo.
- AdBlue Emulator V4 (with Volvo plug) – it’s the same emulator as V4, but it has a genuine Volvo connector for direct connection and easy plug and play installation.
Continue reading AdBlue Emulator price update for bulk kits
AdBlue Emulator product series V4 NOx and V5 NOx are the most popular. We have reduced prices for these products several times last year. Now it’s time to reduce the price again. We’re glad to announce that AdBlue Emulator V4 NOx emulators now available just for 69.99 EUR (version for Volvo with direct connection plug costs a little bit more). AdBlue Emulator V5 NOx now available just for 39.99 EUR. By the way, there is sale available for emulator bulk kits.
Just to remind you, V4 emulator series supports EURO 5 trucks made by DAF, Iveco, MAN, Renault, Volvo. V4 is the only AdBlue Emulator on the market which fully supports DAF LF (Grundfos) trucks. V5 emulators compatible with EURO 5 trucks made by DAF, MAN, FORD, Iveco, Volvo, Renault, and Scania. Easy to install, safe to use, saves a lot of money. An ideal solution to override onboard SCR systems on supported trucks.
These emulators designed and manufactured in the European Union so there is no doubt about their quality and reliability (just don’t forget to install them properly in a dry area of your truck). Moreover, we’re shipping them from EU and you can get them next working day (DHL Express shipping service with a next day delivery to any EU country). Continue reading AdBlue Emulator V4 and V5 models on sale!
Easter is coming soon, and we have an excellent offer for you. Three discount coupons of 10, 15 and 20 percent discount (discount coupons valid till 30.04.2017). These coupons are for all three AdBlue Emulator bulk kit products. We have bulk options of 10, 20 and 50 units per package. Kits can contain selected type of emulators, and there are three options – V4 emulators, V4 emulators (with Volvo plug for fast connection) and finally V5 emulators.
AdBlue Emulator kit discounts and coupon codes
- Emulator kit 10x available with -10% discount. To get it, please use the coupon code “easter10” (you can enter the coupon in your shopping cart).
- Emulator kit 20x available with -15% discount. To get it, please use the coupon code “easter15” (you can enter the coupon in your shopping cart).
- Emulator kit 50x available with -20% discount. To get it, please use the coupon code “easter20” (you can enter the coupon in your shopping cart).
Each coupon is associated with a particular product and can’t be used with other products. If you need any assistance, please contact us directly. And for now – Happy Easter! Continue reading Up to 20% Easter discounts for AdBlue Emulator bulk kits