Posted on

Scania SDP3 2.48.1 latest software version update available

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 software gets a new update with a version 2.48.1 release available on our store. It is the latest and current SDP3 software version on the market to this day. Fully compatible with Scania VCI2 and Scania VCI3 diagnostic tools. Remember that you need at least Microsoft Windows 7 OS version or newer to run this software. All older Microsoft OS versions are not supported by the latest SDP3 versions, including SDP3 2.48.1. Also, you need to know that SDP3 2.48.1 comes with the latest type of USB HASP license key. The latest USB HASP key is incompatible with older SDP3 versions, and older key releases (black and yellow HASP keys) are incompatible with the most recent software version.

From now we offer all our Scania VCI products (Scania VCI 2 and VCI 3, except VCI 1) with a 2.48.1 software version and the latest HASP key. You can buy an SDP3 kit (SDP3 software and USB HASP license key), or you can purchase just a software update if you have a compatible USB HASP key. Anyway, we recommend you to contact us before purchasing an SDP3 kit or upgrade if you’re not sure what product you need. Continue reading Scania SDP3 2.48.1 latest software version update available

Posted on

Scania SDP3 2.46.1 latest software version update available

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 software version update 2.46.1 released and now available on our store. It’s the latest SDP3 software version to this day. Fully compatible with Scania VCI2 and Scania VCI3 diagnostic tools. Remember that you need at least Microsoft Windows 7 OS version or newer to run this software. Older Microsoft OS versions are not supported. Also, you need to know that SDP3 2.46.1 comes with the latest USB HASP license key. The latest USB HASP key incompatible with older SDP3 versions, and older key releases (black and yellow HASP keys) inconsistent with the most recent software version.

From now we offer all our Scania VCI products (Scania VCI2 and VCI3, except VCI1) with 2.46.1 software version and the latest HASP key. You can buy an SDP3 kit (SDP3 software and USB HASP license key), or you can purchase just a software update if you have a compatible USB HASP key. Anyway, we recommend you to contact us before purchasing SDP3 kit or upgrade if you’re not sure what product you need. Continue reading Scania SDP3 2.46.1 latest software version update available

Posted on

Scania SDP3 2.45 version is now available across all related products

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 software version 2.45 is now available in all VCI2 and VCI3 kits and as a stand-alone product. 2.45 is the latest version of SDP3 software. This version is compatible only with Scania VCI2 and Scania VCI3 diagnostic adapters (not suitable for the Scania VCI1 tool as it requires Scania SD2/SP2 software). Scania SDP3 comes with a USB HASP license key and supports three license levels (High, Industry & Marine, and Internal). The latest SDP3 is available as a stand-alone product (new license and as an update service). Make sure your USB HASP key is suitable for the newest license type before making any update purchases, you can do it by contacting us. Continue reading Scania SDP3 2.45 version is now available across all related products

Posted on

Scania SDP3 2.44.1 version available in kits and as a stand-alone product

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 software version 2.44.1 is now available in all VCI2 and VCI3 kits and as a stand-alone product. 2.44.1 is the latest version of SDP3 software. This version is compatible only with Scania VCI2 and Scania VCI3 diagnostic adapters (not suitable for the Scania VCI1 tool as it requires Scania SD2/SP2 software). Scania SDP3 comes with a USB HASP license key and supports three license levels (High, Industry & Marine and Internal). The latest SDP3 is available as a stand-alone product (new license and as an update service). Make sure your USB HASP key is suitable for the newest license type before making any update purchases, you can do it by contacting us. Continue reading Scania SDP3 2.44.1 version available in kits and as a stand-alone product

Posted on

Volvo – Renault EURO 6 emulators in bulk and a new version of SDP3

Volvo Xmas Card

Volvo-Renault EURO 6 V3 emulators are now the top sellers, and we thought its time to make the bulk kits of this emulator type available. So, from now you can buy Volvo-Renault EURO 6 V3 emulators in bulk kits of ten units. This is the latest and most advanced version of EURO 6 emulators available on the market for Volvo and Renault trucks. There are no more compatibility issues with vehicles equipped with a retarder system. V3 emulator supports both types of trucks, with and without retarder system. Emulators developed and manufactured in the European Union. We are shipping all our products worldwide with a next business day delivery option to any EU country. Twelve-month warranty, documentation and easy installation.

Also today we started to offer a brand new Scania SDP3 version 2.38.0 (USB HASP key) separately and in kits with Scania VCI2 and Scania VCI3 diagnostic tools. Moreover, we offer upgrades from older SDP3 versions to the latest version (if your USB HASP key is compatible). Keep in mind that SDP3 allows you to use SDP3 in three modes (1. High Level used for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year. Scania SDP3 2.38.0 fully compatible with VCI2, VCI3 diagnostic tools and works only on Windows 7 or newer Windows versions.

After all, we want to congratulate you on the upcoming holidays and wish you the best and most productive next year. Thank you for being here with us this year.

Volvo – Renault V3 emulators and SDP3 related products

Attention! NOx emulators are illegal in some countries. You should check your local laws or laws of those countries that you might cross with your vehicle. NOx emulator alters SCR system thus makes the vehicle to produce higher exhaust gas emissions. EURO 6 and EURO 5 vehicles equipped with NOx emulator device will no longer match those EURO standards. Our NOx emulators designed for countries where environmental rules are less strict, and there are no requirements for vehicles to satisfy EURO 6 or EURO 5 regulations. By purchasing any NOx emulator, you assume full responsibility for the use of the device. It’s your personal decision to use an emulator or not. We will not accept any liability for any consequences associated with usage of NOx emulator devices.
Posted on

Scania SDP3 2.36.0 (latest version) is now available

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 (Scania Diagnos & Programmer 3) latest version 2.36.0 is now available to purchase. Scania Diagnos & Programmer 3 is the most popular diagnostic software for Scania trucks and engines, developed by Scania and used in Scania workshops. Compatible with Scania VCI2 and Scania VCI3 diagnostic adapters. Please keep in mind that Scania Diagnos & Programmer 3 version 2.36.0 need at least Microsoft Windows 7 operational system (or higher version). Every SDP3 license comes in the form of HASP (Hardware Against Software Piracy a copy-protection dongle) USB key. Also, from now, we offer Scania VCI2 and Scania VCI3 diagnostic kits with this latest software version, upgrade from earlier SDP3 versions available.

There are three licence levels available with each USB HASP key:

Scania SDP3 Access Level Tool

  1. High Level used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.
  2. Industry & Marine Level used for diagnosis of industrial and marine grade engines made by Scania.
  3. Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.

Continue reading Scania SDP3 2.36.0 (latest version) is now available

Posted on

Scania SDP3 2.35.0 now available in our online store

Scania truck

Scania SDP3 is the most popular diagnostic software solution designed by Scania for diagnosis and programming of Scania vehicles and engines. Now we offer the latest Scania SDP3 software version 2.35.0 (with Scania VCI2 and VCI3 diagnostic tools and as a separate product like brand new install and update for existant install). SDP3 requires licence key – USB HASP licence key. Older USB HASP key versions incompatible with the latest versions (contact us to check out your current USB key version). We provide USB HASP licence keys except on SDP3 update product. This key covers three types of licenses: 1. High Level used for R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for R, P, G, T, K, N series (buses, trucks) over the 2004 year. Please keep in mind that SDP3 2.35.0 works only on computers equipped with Windows 7 OS and we recommend a 32bit version of Windows. If you need more information please contact us. Continue reading Scania SDP3 2.35.0 now available in our online store

Posted on

Scania SDP3 (2.34.0) latest version is now available

Scania truck

Scania SDP3 is now available in the latest version 2.34.0 (supported only by the newest USB HASP license key). Compatible with both most popular Scania diagnostic tools VCI2 and VCI3. If you want to upgrade your current version of SDP3 you need to purchase the latest USB HASP key that supports this new version. VCI2 and VCI3 will be shipped with the most recent SDP3 version. Just to remind you, these keys allow you to use several levels of software capabilities. This key covers three types of licenses: 1. High Level used for R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for R, P, G, T, K, N series (buses, trucks) over the 2004 year. Please keep in mind that SDP3 2.34.0 works only on computers equipped with Windows 7 OS and we recommend a 32bit version of Windows. If you have any questions, please contact us directly. Continue reading Scania SDP3 (2.34.0) latest version is now available