Tag: Tachograph

Posted on by

MAN TGS3 (2022+) and DTCO SIM programmer new products on stock

Cardiag Inc. logo

MAN TGS3 (2022+) SCR emulator and DTCO SIM programmer for digital tachograph emulators just hit our stock and available for purchase. These two products were highly demanded by the market.

MAN TGS3 (2022+)

MAN TGS3 Emulator EURO 5 is the latest SCR emulator of its kind designed to support MAN TGS3 series with EURO 5 exhaust system manufactured from 2022. This device allows you to operate vehicle without power limiting and switching into the limp mode. Even if the SCR system has the malfunction MAN TGS3 Emulator EURO 5 SCR emulator is capable to emulate correct signals for the ECU (SCR system malfunction, DTC errors, empty DEF liquid tank). Emulator can be installed on the faulty system, but it is still recommended to clear all DTC errors after complete installation. Emulator is designed, tested and manufactured in the EU. World wide shipping with possible next day delivery to EU countries. Device has 12 month limited warranty.

DTCO SIM Programmer (Tachograph Emulator Programmer)

DTCO SIM Programmer allows you to fully program all compatible Tachograph Emulators. Now you can program compatible DTCO SIM emulators. All programmable parameters like tachograph type, mileage, K and L factors are available for programming. If you’re not sure what DTCO SIM Programmer is used for or you have doubts about the compatibility, please contact us before purchasing this product. Continue reading MAN TGS3 (2022+) and DTCO SIM programmer new products on stock

Posted on by

SCR emulators and Tachograph Emulator DTCO SIM CAN spring discounts!

SCR Emulator V4 EVO for Mercedes-Benz MP4 EURO 5

SCR emulators and Tacho Emulator is now on sale with a spring discount! Great chance to get some great equipment for a very good price. So first things first, shortly we have our traditional spring sale, and this year we offer discounts for all SCR emulators and the Tachograph Emulator DTCO SIM CAN devices. Remember, this sale is valid only up to 2023 May 1st.

SCR emulators

You can buy any SCR emulator with a 10% discount by using the coupon code “spring10“. Discount applies only to emulators, not applicable to accessories like cables, connectors, or SCR emulator flashing/programming devices. Continue reading SCR emulators and Tachograph Emulator DTCO SIM CAN spring discounts!

Posted on by

Tachograph Emulator DTCO SIM CAN on stock!

Tachograph Simulator

Tachograph Emulator DTCO SIM CAN (Tachograph Simulator) is back in stock. Just a small reminder, it is designed to replace the real tachograph on any supported vehicle. This tachograph dummy can simulate all necessary signals that are required by other vehicle electronic modules. If a truck or bus is exported to any country where are no requirements to use tachographs you can install this electronic module to keep your car running usually.

Tachograph Emulator DTCO SIM CAN specifications

  • V imp, 4 imp/m
  • Zero speed signal
  • Vehicle speed (via CAN line)
  • Distance traveled (K-line or CAN line)
  • Date and time (K-line or CAN line)

The tachograph simulator module is easy to install. The device was developed and manufactured in the European Union. One-year limited warranty and fast worldwide delivery. We will provide all necessary technical support, installation, and users manuals.

Continue reading Tachograph Emulator DTCO SIM CAN on stock!

Posted on by

Tachograph engineering cards now available on our store

Universal Tachograph Programmer

Tachograph engineering cards are essential components if your workshop wants to do service for digital tachographs and program them. However, it’s not enough to have a tachograph programmer device. It will not provide full access to engineering options and full control over the parameters you would like to access and change. That’s when the tachograph engineering card steps in and helps you to access everything and program tacho devices as you need.

From now Cardiag provides these cards for all tachograph service workshops. Tachograph programming cards are available for the price of 999 EUR per unit. For more information, please get in touch with us directly. We do not provide any training related to the use of this product, so it’s purely dedicated to professional users. Before programming any devices, it is important to make sure that you really know what you are doing and how the programming is made properly. Continue reading Tachograph engineering cards now available on our store

Posted on by

Tachograph Emulator DTCO SIM CAN spring discount

Tachograph

Tachograph Emulator DTCO SIM CAN product line gets spring discount. Discount applied to all products from this product line, so everyone should find a suitable tachograph emulator for a better price. We can offer DTCO SIM CAN V1 emulator as low as 149 EUR for one unit and 109,95 EUR per unit if you order a kit of 20 units.

Tachograph Emulator DTCO SIM CAN (Tacho Simulator) designed to replace the real tachograph module on any supported truck, bus, or other vehicles. This dummy emulator device simulates all necessary signals required by other electronic modules in your truck or other vehicles. Tacho emulator helps solve a lot of problems. If a truck or bus is exported to any country without requirements to use tachographs on heavy and commercial vehicles, you could install this electronic module to keep your car running correctly.

These devices were developed and manufactured in the European Union. We provide all the necessary information and documentation needed for the installation and operation of these devices. Emulators shipped worldwide with a next business day delivery option to EU countries. These electronic devices have a 12-month limited warranty.

DTCO SIM CAN emulator specifications

  • V imp, 4 imp/m
  • Zero speed signal
  • Vehicle speed (via CAN line)
  • Distance traveled (K-line or CAN line)
  • Date and time (K-line or CAN line)
  • Easy to install
  • User friendly

Continue reading Tachograph Emulator DTCO SIM CAN spring discount

Posted on by

Tachograph Emulator DTCO SIM CAN price reduced

Tachograph Simulator

Tachograph Emulator DTCO SIM CAN devices are now available at a reduced price. The discount applied to all variants of this product, including sets of ten, twenty, and fifty units. Thus, one unit now costs 199 EUR if you buy one or up to ten units, or 149 EUR per unit if you buy a set of 50 units or more.

Tachograph Emulator DTCO SIM CAN (Tachograph Simulator) designed to replace the real tachograph on any supported truck, bus, or other vehicles. This dummy tachograph simulates all necessary signals that are required by other electronic modules in your car. Tacho emulator handy device, if a truck or bus exported to any country without requirements to use tachographs on heavy and commercial vehicles, you could install this electronic module to keep your car running correctly.

These devices developed and manufactured in the European Union. We provide all the necessary information and documentation needed for the installation and operation of these devices. Emulators shipped worldwide with a next business day delivery option to EU countries. These electronic devices have a 12-month limited warranty.

Tachograph Emulator DTCO SIM CAN specifications

  • V imp, 4 imp/m
  • Zero speed signal
  • Vehicle speed (via CAN line)
  • Distance traveled (K-line or CAN line)
  • Date and time (K-line or CAN line)
  • Easy to install
  • User friendly

Continue reading Tachograph Emulator DTCO SIM CAN price reduced

Posted on by

Universal Tachograph Programmer on stock

Universal Tachograph Programmer

Universal Tachograph Programmer is now available on Cardiag online store. This tool designed only for professional use. Tachograph Programmer capable of diagnosing, programming and calibrating various tachograph devices made by several manufacturers like VDO, Kienzle and other. Since it shipped in a ready-to-run kit, you can start your work instantly. All cables and adapters included in the package. No need for an additional power source, it gets the power from the tachograph device. Universal Tachograph Programmer is a compact and user-friendly device. An intuitive menu allows easy control of all functions. Automation makes the usage of this device even more comfortable, it also recognises tachograph model and necessary communication protocol. One tool is suitable for almost all most popular tachograph devices.

Universal Tachograph Programmer features

  • W parameter determination on measuring track (with optional photo-cell) or rolling road.
  • K parameter measure for KTCO 1314, KTCO 1318 and FTCO1319.
  • Tachograph parameter programming.
  • Activation and deactivation of IMS (Independent Motion Signal).
  • Activation and deactivation of VDO tachograph counter.
  • Odometer reset and adjustment (accurate mileage correction).
  • Speed simulation and customizable automatic test diagram.
  • DTCS reading (Digital) and erasing.
  • Sensor pairing function – activation.
  • Tachograph internal clock test.
  • Workshop card PIN recording and input.

Tachograph Programmer kit

  • Universal Tachograph Programmer
  • RS232 cable-adapter
  • CA-DIGITAL-0 cable
  • CA-CROCO-0 cable
  • CA-EGK100-0 cable
  • CA-KTCO-0 cable
  • CA-MTCO-1 cable
  • CA-1319-0 cable
  • FC-VR2400-1 cable

Continue reading Universal Tachograph Programmer on stock