Posted on

Enigma tool with a huge discount available now at Cardiag shop

Enigma Tool

Enigma Tool, without a doubt, is one of the most iconic and powerful tools for programming and adjusting vehicle dashboards and specific ECUs. Naturally, it is a very expensive tool requiring constant software updates, making it impossible for anyone to have it in a workshop. However, we have great news! Now Enigma Tool with a one-year software update subscription is available for only 5499 EUR! Yes, it’s so cheap, you can see the history of this tool’s price, and you will understand why we call it cheap.

Enigma product

Enigma Tool features

  • Works with newest models of cars;
  • Safe for tested/repaired electronic systems;
  • Reliable mode of operation;
  • Exceptionally simple, intuitive use;
  • Frequent software updates;
  • User can read and write the settings via the diagnostic connector (where available);
  • Professional construction;
  • Software updates available, activation of the software via Internet;
  • Works with a PC via the USB socket;
  • User can back up data;
  • User has option to receive software on demand, client-requested;
  • 12 V power supply, available in any car;
  • Small size (210×130×40);

Continue reading Enigma tool with a huge discount available now at Cardiag shop

Posted on

BMW KEY PROG 2 (BKP2) is now available on the Cardiag shop

BMW KEY PROG 2

BMW KEY PROG 2 (BKP2) one of the latest BMW group-related products on the market. It is capable of programming keys for the BMW F series and compatible Rolls-Royce vehicles. Using the high-speed communication protocol ENET allows BMW KEY PROG 2 (BKP2) to program keys in 2 minutes (speed may vary depending on vehicle type). We need to mention the compatibility range that allows working with CAS4 and CAS4+ ECU’s supporting the EWS4 and EWS5 immobilizer systems. This tool is shipped worldwide and comes with a 12-month warranty.

BMW KEY PROG 2 (BKP2) compatibility

  • CAS4 EWS4 – all versions fully supported.
  • CAS4 EWS5 – only with software up to ISTA-P v.52 (01-2014 m.y.)

All key programming is made by flashing the ECU via a high-speed ENET bus. Flashing time about 2 minutes (may vary depending on vehicle). Continue reading BMW KEY PROG 2 (BKP2) is now available on the Cardiag shop

Posted on

DiagProg 4 update 2020 released and available on Cardiag

Diagprog 4 updates

DiagProg 4 team keeps the development process even in the current complicated conditions. Thus allows us to offer you the latest software versions for this fantastic tool. So what’s new and what we offer you now. The most notable news is brand new software versions for Porsche, Subaru, Citroen, and Opel vehicles.

DiagProg new software

  • Opel 2017 software- 2019 Crossland X, Opel Grandland – Yazaki with D70F3529 (IC YZK CMB N3) – programming by diagnostic way (C22)
  • Citroen 2016 software – 2019 C3, Toyota ProAce II – Yazaki with R5F10DMJL (IC YZK CMB N1) – programming by diagnostic way (C22) – Program number 159
  • Subaru WRX 2018 software – 2.0 Turbo (FA20F) ECM HITACHI with R5F72543RBGV – programming/testing via OBDII – Program number 161
  • Porsche 2019 software – Cayman (718), Macan (95B) with Atmel ATMLP628 programming by C12 – Program number 169

Also, there are new functions introduced:

  • Toyota C-HR 2020 with D70F3535 – programming via OBDII
  • Lexus ES250 – 2019 DENSO (S6J3001LSJ) – programming via C21
  • Lexus UX250h – 2019 DENSO (S6J3001LSJ) – programming via C21

And even more, there are updates for other DiagProg 4 software:

  • Alfa Romeo 4C – programming via OBDII – new software version
  • BMW, MINI BDC module – programming via OBDII – new software version
  • BMW, MINI BDC module – new flash files added to server DataBase
  • PSA BSI Johnson Controls (KWP2000) – new flash files added to server DataBase
  • Honda with MB91F06xBS – new flash files added to server DataBase
  • VW The Beetle UDS, Up! with D70F3427+95320 – new AES password added

It’s time to update your DP4 tool. Please contact us if you are interested in this awesome update, and we will provide you with all information you need.

DiagProg 4 related products

Attention! Keep in mind that some of the DP4 functions may be illegal (like altering odometer data – mileage) in particular countries. By using DP4 equipment, you accept all responsibilities that may be associated with your activities.

Posted on

BMW Explorer Full and Basic versions now available on our shop

BMW Explorer kit

BMW Explorer is an ultimate software and hardware kit if you’re looking for a really serious diagnosis, programming, codding and maintenance solution for your BMW workshop. Unbeatable performance and capability list. There are no alternatives for this amazing kit if you work with BMW, Mini, and Rolls-Royce vehicles. It has a very wide range of supported models, ECU’s and functions. BMW Explorer is available in two versions – Basic and Full.

BMW Explorer compatibility

  • BMW (2003-): E60, E65, E66, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, F01, F02, F07, F10, F11, F12 ,F15, F16, F20, F21, F30, F31, F32, F80
  • Mini Cooper (2005-): R56, R60
  • Rolls-Royce (2003-)
  • Supported modules: CAS, DME, EGS, EKPM, GWS, VTG, ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM, AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF, SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM

Continue reading BMW Explorer Full and Basic versions now available on our shop

Posted on

Diagprog 4 FULL autumn promotion (limited time offer)

Diagprog 4 updates

Diagprog 4 FULL autumn promotion started now! We offer DP4 FULL kit just for 5999 EUR. It’s a limited time offer, and you grab DP4 for this excellent price until the 24’th of September 2018. Don’t miss this offer since the regular price for this kit is 8999 EUR. You’ll get the full and latest hardware and software kit that was available on the day of purchase (latest DP4 head unit, full kit of cables and adapters and of course complete kit of software). Diagprog is one of the most popular dashboard repair and programming tools on the market comparable only with Enigma Tool product. Support an ultimately wide range of vehicles, motorbikes. Has a lot of cables and adapters for most demanding jobs, but well known for its ability to make a lot just by using simple OBD connection. Huge support list of various electronic modules, chips and EEPROM chips. Shipped worldwide and comes in ready to run kit.

Check out the DP4 software updates here – DP4 software updates

Continue reading Diagprog 4 FULL autumn promotion (limited time offer)

Posted on

The last DiagProg 4 (FULL) on the stock with promo price!

Diagprog 4 updates

DiagProg 4 (FULL) available on our shop for a promo price. Only one unit and it’s now available just for 6499 EUR, usual price is 8999 EUR. So if you want to start your summer by purchasing one of the most sophisticated dashboards and odometer programmers, it’s your chance. As we said, we have only one unit, and there will be no more available until the next promotion.

What do you get for 6499 EUR? Well, you’ll get the same kit that is usually sold for 8999 EUR. It’s a FULL version of DP4, and it will be equipped with the latest software and hardware that was available on the day of purchase (latest DP4 head unit, full kit of cables and adapters and of course complete kit of software). Compatible with all most popular vehicles and has an ultra wide support range of electronic modules, dashboards, EEPROM chips and more. Constantly updateable, ready to connect to the feature vehicles as soon as they hit the market. It’s a must-have tool for any vehicle maintenance professional.

You can always check the DP4 software updates here – DP4 software updates

Continue reading The last DiagProg 4 (FULL) on the stock with promo price!

Posted on

Enigma Tool update 3.59

Enigma Tool

It’s the latest software update (released on 2018.04.09) for Enigma Tool device. Some of these updates are free, and some of them are premium. Also, you need to know that some of these updates require earlier versions of premium upgrades. Please contact us if you want more information about this Enigma Tool update or if you want to purchase it. If you need software update price calculation by email or phone, please do not forget to specify a serial number of your Enigma device.

Enigma Tool update 3.59

  • BMW G01 / G02 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G11 / G12 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G30 / G31 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G32 DASH BOSCH 35128 DIRECT CALCULATION
  • ACTIVATION FOR M35128 EEPROM EDITOR READ/WRITE

Continue reading Enigma Tool update 3.59

Posted on

Diagprog 4 software updates – 2018 April

Diagprog 4 updates

Diagprog 4 software updates released on 2018 February. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

  • FORD Fiesta 2017, 2018 with R7F701405, R7F701414 – programming via OBDII
  • FORD Ecosport 2017, 2018 with R7F701405,R7F701414 – programming via OBDII
  • Lincoln Continental 2016,2017 – programming via OBDII
  • Mazda 6 2017, 2018 – Calsonic Kansei – programming via OBDII
  • Mazda CX-5 2017, 2018 – Calsonic Kansei – programming via OBDII
  • Honda Civic Hybrid 2014 – 93C86 – programming
  • Honda Ridgeline 2017 – 24C16 – programming
  • Mazda 6 (GL) 2017 – programming via OBDII
  • Renault Captur – programming via OBDII
  • Renault Clio IV – programming via OBDII
  • Opel Vivaro II – programming via OBDII
  • GM Cadillac Escalade 2016,2017,2018,
  • GM Chevrolet Silverado 2017,2018 with 4″ TFT display,
  • GM Chevrolet Tahoe 2017,2018 with 4″ TFT display,
  • GM Chevrolet Suburban 2017,2018 with 4″ TFT display,
  • GMC Sierra 1500 2017,2018 with 4″ TFT display,
  • GM Chevrolet Silverado 2017,2018 with 8″ TFT display,
  • GM Chevrolet Tahoe 2017,2018 with 8″ TFT display,
  • GM Chevrolet Suburban 2017,2018 with 8″ TFT display,
  • GMC Sierra 1500 2017,2018 with 8″ TFT display,
  • GM Chevrolet Camaro 2017,2018 – programming via OBDII + C12
  • BMW 5 (G30/G31) – Bosch M35128WT – programming without the emulator
  • BMW 7 (G11/G12) – Bosch M35128WT – programming without the emulator
  • Hyundai Azera 2017 with R7F701403 – programming via OBDII
  • Ford F?50 2015 with 4″ TFT display – programming via OBDII
  • Suzuki Kizashi – programming via OBDII
  • Honda with MB91F061BS – new flash files added to server dataBase

Continue reading Diagprog 4 software updates – 2018 April