Posted on

Scania SDP3 2.43.1 already available in kits and as a stand-alone product

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 2.43.1 is the latest SDP3 version to this date. Like previous versions, this one is compatible only with Scania VCI2 and Scania VCI3 diagnostic adapters (please do not try SDP3 software along with the Scania VCI1 adapter). As always, we offer the latest version of SDP3 with the mentioned compatible Scania diagnostic adapters. Also, as a stand-alone product and as an update service (note: make sure your USB HASP key is suitable for the latest license type before making a purchase, you can do it by contacting us).

If you’re buying Scania VCI2 or VCI3 standard kit that includes SPD3, or you’re buying SDP3 as a stand-alone product, you’ll get the USB HASP key, which is hardware license key for your SDP3 installation.

Well, like previous SDP3 versions, this one has the same three license levels available. Continue reading Scania SDP3 2.43.1 already available in kits and as a stand-alone product

Posted on

Scania SDP3 2.42.1 latest software version is now available!

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 2.42.1 version is here, and it means you can start a new year with the latest version of Scania diagnostic and programming software. As always, we try to offer the latest diagnostic software and tools as soon as possible, so your workshop could work flawlessly even with the latest vehicles and engines.

Scania SDP3 2.42.1 has the same hardware compatibility as recent SDP3 versions. It is compatible with Scania VCI2 and Scania VCI3 diagnostic interfaces. Remember, if you want to work with older Scania vehicles and engines, you need the Scania VCI1 interface and Scania SD2 and Scania SP2 software kit.

SDP3 license comes in the form of a USB HASP key. There are three software levels available.

Scania SDP3 Access Level Tool

  1. High Level used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.
  2. Industry & Marine Level used for diagnosis of industrial and marine grade engines made by Scania.
  3. Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.

Continue reading Scania SDP3 2.42.1 latest software version is now available!

Posted on

Scania Marine & Industry type cables-adapters on stock

Scania Marine & Industry cable-adapter

Scania Marine & Industry type cable-adapter is here, and we have it on stock again. This is an essential accessory if you want to be able to connect your Scania VCI2 or Scania VCI3 to the marine type or heavy-duty industrial Scania engine. Scania Marine/Industry type cable-adapter or simply Scania 1862924 cable designed to be compatible only with Scania VCI2 and VCI3, not supported by VCI1. Works as an extension for an OBD2 connector, simply plug or unplug. There’s no need for other hardware. However, you need a compatible Scania SDP3 software that supports all those special engines from marine and industry applications.

Availability

We offer Scania 1862924 cable as a single part, in particular, kits of Scania VCI2 and VCI3 and of course as kits of these cables (10, 20 and 50 units per package). Continue reading Scania Marine & Industry type cables-adapters on stock

Posted on

Volvo – Renault EURO 6 emulators in bulk and a new version of SDP3

Volvo Xmas Card

Volvo-Renault EURO 6 V3 emulators are now the top sellers, and we thought its time to make the bulk kits of this emulator type available. So, from now you can buy Volvo-Renault EURO 6 V3 emulators in bulk kits of ten units. This is the latest and most advanced version of EURO 6 emulators available on the market for Volvo and Renault trucks. There are no more compatibility issues with vehicles equipped with a retarder system. V3 emulator supports both types of trucks, with and without retarder system. Emulators developed and manufactured in the European Union. We are shipping all our products worldwide with a next business day delivery option to any EU country. Twelve-month warranty, documentation and easy installation.

Also today we started to offer a brand new Scania SDP3 version 2.38.0 (USB HASP key) separately and in kits with Scania VCI2 and Scania VCI3 diagnostic tools. Moreover, we offer upgrades from older SDP3 versions to the latest version (if your USB HASP key is compatible). Keep in mind that SDP3 allows you to use SDP3 in three modes (1. High Level used for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks) over the 2004 year. Scania SDP3 2.38.0 fully compatible with VCI2, VCI3 diagnostic tools and works only on Windows 7 or newer Windows versions.

After all, we want to congratulate you on the upcoming holidays and wish you the best and most productive next year. Thank you for being here with us this year.

Volvo – Renault V3 emulators and SDP3 related products

Attention! NOx emulators are illegal in some countries. You should check your local laws or laws of those countries that you might cross with your vehicle. NOx emulator alters SCR system thus makes the vehicle to produce higher exhaust gas emissions. EURO 6 and EURO 5 vehicles equipped with NOx emulator device will no longer match those EURO standards. Our NOx emulators designed for countries where environmental rules are less strict, and there are no requirements for vehicles to satisfy EURO 6 or EURO 5 regulations. By purchasing any NOx emulator, you assume full responsibility for the use of the device. It’s your personal decision to use an emulator or not. We will not accept any liability for any consequences associated with usage of NOx emulator devices.
Posted on

Scania SDP3 2.36.0 (latest version) is now available

Scania SDP3 - Scania Diagnos & Programmer 3

Scania SDP3 (Scania Diagnos & Programmer 3) latest version 2.36.0 is now available to purchase. Scania Diagnos & Programmer 3 is the most popular diagnostic software for Scania trucks and engines, developed by Scania and used in Scania workshops. Compatible with Scania VCI2 and Scania VCI3 diagnostic adapters. Please keep in mind that Scania Diagnos & Programmer 3 version 2.36.0 need at least Microsoft Windows 7 operational system (or higher version). Every SDP3 license comes in the form of HASP (Hardware Against Software Piracy a copy-protection dongle) USB key. Also, from now, we offer Scania VCI2 and Scania VCI3 diagnostic kits with this latest software version, upgrade from earlier SDP3 versions available.

There are three licence levels available with each USB HASP key:

Scania SDP3 Access Level Tool

  1. High Level used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.
  2. Industry & Marine Level used for diagnosis of industrial and marine grade engines made by Scania.
  3. Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.

Continue reading Scania SDP3 2.36.0 (latest version) is now available

Posted on

Scania SDP3 2.35.0 now available in our online store

Scania truck

Scania SDP3 is the most popular diagnostic software solution designed by Scania for diagnosis and programming of Scania vehicles and engines. Now we offer the latest Scania SDP3 software version 2.35.0 (with Scania VCI2 and VCI3 diagnostic tools and as a separate product like brand new install and update for existant install). SDP3 requires licence key – USB HASP licence key. Older USB HASP key versions incompatible with the latest versions (contact us to check out your current USB key version). We provide USB HASP licence keys except on SDP3 update product. This key covers three types of licenses: 1. High Level used for R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for R, P, G, T, K, N series (buses, trucks) over the 2004 year. Please keep in mind that SDP3 2.35.0 works only on computers equipped with Windows 7 OS and we recommend a 32bit version of Windows. If you need more information please contact us. Continue reading Scania SDP3 2.35.0 now available in our online store

Posted on

Scania SDP3 (2.34.0) latest version is now available

Scania truck

Scania SDP3 is now available in the latest version 2.34.0 (supported only by the newest USB HASP license key). Compatible with both most popular Scania diagnostic tools VCI2 and VCI3. If you want to upgrade your current version of SDP3 you need to purchase the latest USB HASP key that supports this new version. VCI2 and VCI3 will be shipped with the most recent SDP3 version. Just to remind you, these keys allow you to use several levels of software capabilities. This key covers three types of licenses: 1. High Level used for R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for R, P, G, T, K, N series (buses, trucks) over the 2004 year. Please keep in mind that SDP3 2.34.0 works only on computers equipped with Windows 7 OS and we recommend a 32bit version of Windows. If you have any questions, please contact us directly. Continue reading Scania SDP3 (2.34.0) latest version is now available

Posted on

Scania VCI2, new version of SDP3 and Industry-Marine cable on stock

Scania truck

Scania VCI2 still the most popular diagnostic tool for Scania vehicle maintenance and diagnosis despite the fact that there is newer version VCI3. We have good news for all Scania professionals.

First of all, we have Scania VCI2 in stock, and it is available even in bulk version of ten units per order. The bulk version comes without any software, but for an ultimate price.

Secondly, a few days ago we have announced that we have the latest Scania SDP3 version in stock (version 2.32.0). You can get it as an update for your current SDP3 version (if your USB HASP key is suitable), or as a fresh install kit (SDP3 software and USB licence key). By the way, you’ll get SDP3 software with every VCI2 purchased from our shop if it’s not a bulk version of ten units. Other diagnostic and maintenance software for Scania engines and vehicles available in our store like Scania XCOM, Scania Multi, Scania SOPS file encoder/decoder software.

And the last one, we have the Marine & Industry type cable adapter for Scania VCI2 and Scania VCI3 in stock again. We have the limited quantity of these cables-adapters so hurry up, don’t miss your chance to get one. Continue reading Scania VCI2, new version of SDP3 and Industry-Marine cable on stock