Tachograph Emulator DTCO SIM CAN devices are now available at a reduced price. The discount applied to all variants of this product, including sets of ten, twenty, and fifty units. Thus, one unit now costs 199 EUR if you buy one or up to ten units, or 149 EUR per unit if you buy a set of 50 units or more.
Tachograph Emulator DTCO SIM CAN (Tachograph Simulator) designed to replace the real tachograph on any supported truck, bus, or other vehicles. This dummy tachograph simulates all necessary signals that are required by other electronic modules in your car. Tacho emulator handy device, if a truck or bus exported to any country without requirements to use tachographs on heavy and commercial vehicles, you could install this electronic module to keep your car running correctly.
These devices developed and manufactured in the European Union. We provide all the necessary information and documentation needed for the installation and operation of these devices. Emulators shipped worldwide with a next business day delivery option to EU countries. These electronic devices have a 12-month limited warranty.
Tachograph Emulator DTCO SIM CAN specifications
- V imp, 4 imp/m
- Zero speed signal
- Vehicle speed (via CAN line)
- Distance traveled (K-line or CAN line)
- Date and time (K-line or CAN line)
- Easy to install
- User friendly
Continue reading Tachograph Emulator DTCO SIM CAN price reduced
AdBlue emulators, more precisely, their most popular models are now available at lower Easter prices. We have good news for those who are looking for EURO 6 AdBlue emulators compatible with Volvo, Mercedes-Benz, Renault, MAN, and Iveco trucks.
Here’s the deal. We have reduced prices on products like SCR Emulator V4 EVO (Volvo and Mercedes-Benz), SCR Emulator Volvo-Renault EURO 6 V3 (with and without retarder), Iveco EURO 6 SCR Emulator and MAN EURO 6 SCR Emulator. Also, some of these products are now available in the kits of 5 units with slightly lower prices than single units.
If you’re not sure which emulator is suitable for your truck, please contact us before making an order. And a small reminder, our emulators are developed and manufactured in the EU. We offer a 12-month warranty and next business day delivery to any EU country (2-3 business day worldwide shipping). Continue reading AdBlue emulators are now available with Easter discounts
Scania SDP3 2.43.1 is the latest SDP3 version to this date. Like previous versions, this one is compatible only with Scania VCI2 and Scania VCI3 diagnostic adapters (please do not try SDP3 software along with the Scania VCI1 adapter). As always, we offer the latest version of SDP3 with the mentioned compatible Scania diagnostic adapters. Also, as a stand-alone product and as an update service (note: make sure your USB HASP key is suitable for the latest license type before making a purchase, you can do it by contacting us).
If you’re buying Scania VCI2 or VCI3 standard kit that includes SPD3, or you’re buying SDP3 as a stand-alone product, you’ll get the USB HASP key, which is hardware license key for your SDP3 installation.
Well, like previous SDP3 versions, this one has the same three license levels available. Continue reading Scania SDP3 2.43.1 already available in kits and as a stand-alone product
AdBlue Emulator V5 NOx supply was disrupted a few weeks ago, but we restored the stock, and now this product is available in all versions, kits, and quantities. Today we’re actively shipping all pre-orders of AdBlue Emulator V5 NOx made in the last two weeks, new orders made from today will be shipped immediately with the next business day delivery over the EU and 1-3 days worldwide.
Just a small reminder, AdBlue Emulator V5 NOx is compatible only with specific EURO5 vehicles. Please read the product description and, if necessary, contact us for more information before purchasing emulators if you’re not sure about the compatibility with your car. It was developed and manufactured in the EU, all modules covered by a 12-month warranty.
AdBlue Emulator V5 NOx designed to support trucks made by DAF, FORD, Iveco, MAN, Mercedes-Benz (only Bosch ECU), Renault, Scania, and Volvo. This is the most popular product from our AdBlue emulator product range. Easy to install, reliable, and cheap. It’s reprogrammable, so you can change supported truck make at any time you need Continue reading AdBlue Emulator V5 NOx stock restored and available in large kits
DMTC 22 KVA EV charger is an excellent solution if you want to have your EV charging station at home or office. This electric vehicle charger is compact and efficient. Suitable not just for home or office, but also for hotels, parking lots, EV dealers, residential community garages, or shopping centers.
Tired to wait in queues, you want to charge your car while resting at home or working at the office? This charger is the best solution you can find. Best of all, it is easy to install and use. You can install it on any wall (indoor and outdoor). You can connect DMTC 22 KVA EV charger to a single or 3-phase connection. Designed for Mode-3 electric vehicles. Mode-3 is a protocol for an electric vehicle charge cable for AC charging. Where the electric vehicle and charging station handshake to verify the integrity of the earth connection between them and pass the maximum current limit of the charging equipment to the vehicle according to IEC 62196 standard. Continue reading DMTC 22 KVA personal EV charger now available at Cardiag shop
DiagProg 4, as you know, is a highly sophisticated programming device designed to work with various electronic modules of a wide range of vehicles. This tool is capable of hi-end programming operations and mainly used for mileage correction, dashboard programming, and other supported functions.
Many of our customers know that we make promotional sales of DP4 kit or its updates in collaboration with DiagProg 4 manufacturers. And now the time has come, it’s time to update your DiagProg 4 to the latest available to this day version for a reasonable price. Yes, the winter sale of DiagProg 4 is ON. It will last from 30.01.2020 to 18.02.2020, and the best thing is the price! You can fully update your DP4 kit just for 3199 EUR.
Note! It doesn’t matter which software version you are running now on your DP4. This update will make it fully updated. Continue reading DiagProg 4 FULL UPDATE winter sale is ON! Update your DP4 now!
DAF EURO 6 SCR emulator product gets an update in the form of fresh firmware. From now, there is no need to provide a VIN code on the purchase, and there’s no need to enter the VIN code of the truck before installing the emulator. Enhanced firmware version allows you to install this emulator without extra effort on any DAF EAS-3 vehicle series manufactured from 2014 to the 2017 year.
Moreover, we have reduced the price for this AdBlue emulator to 399 EUR per unit. If you need ten or more units, please contact us directly and we will give you an even better price offer Continue reading DAF EURO 6 SCR emulator product and price update
Scania SDP3 2.42.1 version is here, and it means you can start a new year with the latest version of Scania diagnostic and programming software. As always, we try to offer the latest diagnostic software and tools as soon as possible, so your workshop could work flawlessly even with the latest vehicles and engines.
Scania SDP3 2.42.1 has the same hardware compatibility as recent SDP3 versions. It is compatible with Scania VCI2 and Scania VCI3 diagnostic interfaces. Remember, if you want to work with older Scania vehicles and engines, you need the Scania VCI1 interface and Scania SD2 and Scania SP2 software kit.
SDP3 license comes in the form of a USB HASP key. There are three software levels available.
- High Level used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.
- Industry & Marine Level used for diagnosis of industrial and marine grade engines made by Scania.
- Internal Level for developers used for Scania R, P, G, T, K, N series (buses, trucks and other vehicles) over the 2004 year.
Continue reading Scania SDP3 2.42.1 latest software version is now available!