Posted on

EURO 6 Emulator for Volvo now available only for 99 EUR

Volvo EURO 6 soot level critical

EURO 6 Volvo trucks are quite common on roads. We have good news for all owners of EURO 6 Volvo trucks since we are making a limited time offer for EURO 6 SCR Emulator Volvo V2 product. Now you can purchase this state-of-art emulator just for 99 euros. This device supports all Volvo trucks with the highest at this moment emission control systems (except models with retarder system). These emulators developed and manufactured in Europe, and we offer next business day delivery to any European Union country (with 12 months warranty). We will send emulators prepared for your trucks so don’t forget to provide the DEF (Diesel Exhaust Fluid) tank capacity data (usually 60 or 90 litres, but you must check it yourself to avoid any mistakes and compatibility issues). Please don’t try this emulator on other trucks like Volvo EURO 5 or EURO 4 and trucks made by other manufacturers, and it could harm the emulator and the car itself. Also, don’t forget to read the installation manual and follow all steps carefully. Don’t forget, we have SCR emulators for all vehicles, check out our online store, and you’ll find any SCR emulator that you need.

EURO 6 Emulator for Volvo

Attention! SCR emulators are illegal in some countries. You should check your local laws or laws of those countries that you might cross with your vehicle. SCR emulator alters SCR system thus makes the vehicle to produce higher exhaust gas emissions. EURO 6 and EURO 5 vehicles equipped with SCR emulator device will no longer match those EURO standards. Our SCR emulators designed for countries where environmental rules are less strict, and there are no requirements for vehicles to satisfy EURO 6 or EURO 5 regulations. By purchasing any SCR emulator, you assume full responsibility for the use of the device. It’s your personal decision to use an emulator or not. We will not accept any liability for any consequences associated with usage of SCR emulator devices.
Posted on

Diagprog 4 FULL and Diagprog 4 FULL update promotion

Diagprog 4 updates

Diagprog 4 FULL offer is here! Now you can buy DP 4 FULL or full update for your DP4 device for a very reasonable and motivating price. Our offer is time-limited and valid only until the 20th of June 2018. So here’s the deal. DP4 FULL version (latest software and latest hardware available at the moment of purchase) now available only for 6499 EUR (plus shipping costs). If you do have your own DP4 kit, but it is equipped with an old version of software and hardware (adapters and cables) you can update your DP4 kit just for 3000 EUR price. It doesn’t matter how old your DP4 software is, you can update it now to the latest available version. Please contact us if you need more information. Don’t forget to provide the serial number of your DP4 device when purchasing this product since every update file is compiled for every device individually.

DiagProg 4 products

Posted on

Diagprog 4 software updates – 2018 May

Diagprog 4 updates

Diagprog 4 software updates released on 2018 February. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

  • KIA Sportage 2017 with D70F3526 Yazaki Meter – programming via OBDII
  • Suzuki Swift IV 2017 with D70F3523 – programming via OBDI
  • Suzuki Maruti 2018 with D70F3524 – programming via OBDII
  • Mercedes-Benz DELPHI ECM CRD3.7A – programming via OBDII
  • Mercedes-Benz Citan (W415) – programming via OBDII

Continue reading Diagprog 4 software updates – 2018 May

Posted on

Enigma Tool update 3.59

Enigma Tool

It’s the latest software update (released on 2018.04.09) for Enigma Tool device. Some of these updates are free, and some of them are premium. Also, you need to know that some of these updates require earlier versions of premium upgrades. Please contact us if you want more information about this Enigma Tool update or if you want to purchase it. If you need software update price calculation by email or phone, please do not forget to specify a serial number of your Enigma device.

Enigma Tool update 3.59

  • BMW G01 / G02 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G11 / G12 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G30 / G31 DASH BOSCH 35128 DIRECT CALCULATION
  • BMW G32 DASH BOSCH 35128 DIRECT CALCULATION
  • ACTIVATION FOR M35128 EEPROM EDITOR READ/WRITE

Continue reading Enigma Tool update 3.59

Posted on

Enigma Tool update 3.60

Enigma Tool

It’s the latest software update (released on 2018.05.10) for Enigma Tool device. Some of these updates are free, and some of them are premium. Also, you need to know that some of these updates require earlier versions of premium upgrades. Please contact us if you want more information about this Enigma Tool update or if you want to purchase it. If you need software update price calculation by email or phone, please do not forget to specify a serial number of your Enigma device.

Enigma Tool update 3.60

  • Mitsubishi ASX Fujitsu + 93C86 OBD2
  • Mitsubishi Lancer Fujitsu + 93C86 OBD2
  • Mitsubishi Outlander Fujitsu + 93C86 OBD2
  • Peugeot 4008 Fujitstu + 93C86 OBD2
  • Citroen C-Crosser Fujitstu + 93C86 OBD2
  • Maserati service reset
  • Audi A1 24C64 SW0330 added
  • Volkswagen 24C64 SW1107 and SW1109 added
  • Isuzu C series truck 93C66
  • Isuzu E series truck 93C66
  • Isuzu Giga truck 93C66
  • 912D60 1F68K mask in editor menu

Continue reading Enigma Tool update 3.60

Posted on

Scania SDP3 2.35.0 now available in our online store

Scania truck

Scania SDP3 is the most popular diagnostic software solution designed by Scania for diagnosis and programming of Scania vehicles and engines. Now we offer the latest Scania SDP3 software version 2.35.0 (with Scania VCI2 and VCI3 diagnostic tools and as a separate product like brand new install and update for existant install). SDP3 requires licence key – USB HASP licence key. Older USB HASP key versions incompatible with the latest versions (contact us to check out your current USB key version). We provide USB HASP licence keys except on SDP3 update product. This key covers three types of licenses: 1. High Level used for R, P, G, T, K, N series (buses, trucks) over the 2004 year; 2. Industry & Marine Level used for industrial and marine engines; 3. Internal Level for developers used for R, P, G, T, K, N series (buses, trucks) over the 2004 year. Please keep in mind that SDP3 2.35.0 works only on computers equipped with Windows 7 OS and we recommend a 32bit version of Windows. If you need more information please contact us. Continue reading Scania SDP3 2.35.0 now available in our online store

Posted on

Diagprog 4 software updates – 2018 April

Diagprog 4 updates

Diagprog 4 software updates released on 2018 February. This list includes premium and free software updates. Also, it includes new software fixes. For more information please contact us directly.

  • FORD Fiesta 2017, 2018 with R7F701405, R7F701414 – programming via OBDII
  • FORD Ecosport 2017, 2018 with R7F701405,R7F701414 – programming via OBDII
  • Lincoln Continental 2016,2017 – programming via OBDII
  • Mazda 6 2017, 2018 – Calsonic Kansei – programming via OBDII
  • Mazda CX-5 2017, 2018 – Calsonic Kansei – programming via OBDII
  • Honda Civic Hybrid 2014 – 93C86 – programming
  • Honda Ridgeline 2017 – 24C16 – programming
  • Mazda 6 (GL) 2017 – programming via OBDII
  • Renault Captur – programming via OBDII
  • Renault Clio IV – programming via OBDII
  • Opel Vivaro II – programming via OBDII
  • GM Cadillac Escalade 2016,2017,2018,
  • GM Chevrolet Silverado 2017,2018 with 4″ TFT display,
  • GM Chevrolet Tahoe 2017,2018 with 4″ TFT display,
  • GM Chevrolet Suburban 2017,2018 with 4″ TFT display,
  • GMC Sierra 1500 2017,2018 with 4″ TFT display,
  • GM Chevrolet Silverado 2017,2018 with 8″ TFT display,
  • GM Chevrolet Tahoe 2017,2018 with 8″ TFT display,
  • GM Chevrolet Suburban 2017,2018 with 8″ TFT display,
  • GMC Sierra 1500 2017,2018 with 8″ TFT display,
  • GM Chevrolet Camaro 2017,2018 – programming via OBDII + C12
  • BMW 5 (G30/G31) – Bosch M35128WT – programming without the emulator
  • BMW 7 (G11/G12) – Bosch M35128WT – programming without the emulator
  • Hyundai Azera 2017 with R7F701403 – programming via OBDII
  • Ford F?50 2015 with 4″ TFT display – programming via OBDII
  • Suzuki Kizashi – programming via OBDII
  • Honda with MB91F061BS – new flash files added to server dataBase

Continue reading Diagprog 4 software updates – 2018 April

Posted on

Enigma Tool FULL update spring promotion

Enigma Tool

Enigma Tool FULL update spring promotion is on! We offer to update your current Enigma to the latest available FULL version. This promotion is time limited and will last until the 10th of April 2018. Now it’s your chance to update your Enigma to the FULL and latest version for only 2799 EUR. Don’t forget to provide the serial number of your device while purchasing an update. We need the serial number since all update files are compiled individually to every device. If you need more information just contact us.

What’s included in the update? You’ll get the latest FULL software version that is available on the day of purchase. If your Enigma needs some hardware updates (adapters and cables) we will send them separately. This update suites any Enigma with any version of the software. Also, you can purchase FULL kit if you don’t have this awesome device, you’ll find this product in our online store. Continue reading Enigma Tool FULL update spring promotion